Tel: 86-18825230535
sales@hstech-smt.com
Home
Products
Board Handling Machine
PCB Depaneling Machine
Conformal Coating Machine
Glue Dispensing Machine
Robotic Soldering Machine
Robotic Screwing Machine
Other SMT Machines
News
Company News
Industry News
About
Introduction
Our Quality Policy
Our Facility
Certificates
Organization Structure
Join Us
Contact
Contact Us
Message
FAQ
SWITCH LANGUANG
SMT cooling conveyor manufacturers take you to understand the working principle of cooling conveyors
This article will share the cooling principle of the water-cooled screw conveyor: 1. The SMT cooling conveyor manufacturer tells you that the tubular screw conveyor: choose the tube shaft and shell of the large diameter tube, and the double-layer tube can be sleeved together, so that The amount of water inside can be increased, and the temperature of the material can be quickly lowered.
15
2022
/
08
Mirae pick and place machine manufacturers take you to understand the transfer organization of place machines
PCB transfer and carrier organization. The manufacturer of the Mirae pick and place machine tells you that the conveying mechanism is an ultra-thin belt conveying system placed on the guide rail. Usually, the belt is installed at the edge of the track. Its function is to send the PCB to the predetermined position, and then send it to the bottom after placement.
Mirae pick and place machine manufacturers take you to understand the composition of the placement machines
The Mirae pick and place machine manufacturer tells you that there are many varieties of current placement machines, but whether it is a fully automatic high-speed placement machine or a manual low-speed placement machine, its overall layout is similar.
01
Mirae pick and place machine manufacturers take you to understand the daily maintenance of manual placement machines
1. Check weekly. The manufacturer of the Mirae pick and place machine tells you that inspect the nozzle clamp to check the buffer action, if the action is not smooth, apply a thin layer of lubricant, and if the clamp is loose, tighten it. Move the lens to clean dust and residue from the lens.
25
07
Mirae pick and place machine manufacturers take you to understand the Turret Type placement machine
The Mirae pick and place machine manufacturer tells you that the component feeder of the turret-type placement machine is placed on a single-coordinate moving feeder, and the substrate (PCB) is placed on a X/Y coordinate system moving worktable. The film header is mounted on a turret.
18