The Mirae pick and place machine manufacturer tells you that there are many varieties of current placement machines, but whether it is a fully automatic high-speed placement machine or a manual low-speed placement machine, its overall layout is similar.

1. Check weekly. The manufacturer of the Mirae pick and place machine tells you that inspect the nozzle clamp to check the buffer action, if the action is not smooth, apply a thin layer of lubricant, and if the clamp is loose, tighten it. Move the lens to clean dust and residue from the lens.

The Mirae pick and place machine manufacturer tells you that the component feeder of the turret-type placement machine is placed on a single-coordinate moving feeder, and the substrate (PCB) is placed on a X/Y coordinate system moving worktable. The film header is mounted on a turret.

The Mirae pick and place machine manufacturer tells you that the component feeder and substrate (PCB) of the arch-type placement machine are fixed, and the placement head (with multiple vacuum suction nozzles) moves back and forth between the feeder and the The components are taken out from the feeder, and the position and orientation of the components are adjusted, and then placed on the substrate. Because the placement head is installed on the X/Y coordinate moving beam of the arch type, it is named.

The Mirae chip mounter manufacturer tells you the names and functions of the parts of the chip mounter: 1. Host. Main Power Switch: Turn the host power on or off. Vision Monitor: Displays the recognition of images or components and marks obtained by moving the lens.Operation Monitor: Display the VIOS software screen of the machine operation. If there is an error or problem during the operation, the correction information will also be displayed on this screen.

1. The Mirae chip mounter manufacturer tells you that the temperature control range of the manual high-precision chip mounter complies with the specifications, and the control accuracy is within ±2.0°C. The Mirae chip mounter manufacturer tells you that the speed control of the manual high-precision chip mounter conforms to the specifications of the manual, and the accuracy is controlled within ±0.2m/min.