+
  • HS-YD-880S.jpg
  • 压电阀.jpg

Piezo Valve HS-YD-880S

Keyword:

HSTECH

hiddenValue

  • Description
  • Principle & Control

    Piezo Injector Valve
    1. Adopting modular design, the part in contact with the gel is designed as runner module and the part not in contact with the gel is designed as valve module.

    2. In different applications, the runner module can be replaced to meet the dispensing needs.

    3. Nozzle diameters (from 0.03MM to 0.80MM) are categorized into flat jet, needle, and extension nozzles.Runner modules need to be cleaned regularly in an ultrasonic cleaner. Seals should not be immersed in organic solvents. Special tools are required to clean the nozzles to prevent damage to the nozzles.

    4. When the runner sealing surface accumulates colloid crystals, prohibit the use of sharp objects to remove the crystalline layer to prevent scratching the sealing surface.

    5. In order to avoid the crystallization of colloid in the runner, coagulation, clogging, in the specific application, please consult our technical staff, select the correct runner module.

     

    Piezo Valve Controller

    1. The touch screen controls the piezoelectric injection valve and dispensing system, supports 485 communication, powerful, safe and reliable.

    2. The touch screen adopts graphic control mode, the components of dispensing system and the control display function are displayed graphically, which is concise and intuitive.

    Nozzle heating device

    1. The nozzle is required to be heated to a suitable temperature before dispensing. The heating device adopts one-stage heating mode.

    2. Heating at the nozzle maintains the constant temperature of the gel to meet the best performance of the gel. The best performance of the colloid.

     

    Specification

    Model

    HS-YD-880S

    Size (L*W*H)

    100MM*42MM*130MM

    Weight

    0.6kg

    Material in contact with fluid

    Stainless steel 303, special steel

    Fluid inlet size

    Luer connector(can be connected to the air tube into the rubber way)

    Needle assembly

    Tungsten steel wear-resistant material Φ0.6-Φ3.0mm

    Nozzle assembly

    Tungsten steel wear-resistant material Φ0.03~0.8mm

    Heating assembly

    2080℃

    Fluid seals

    High temperature resistant material

    Maintenance intervals for seal assemblies

    20,000,000 times

    Maximum dispensing frequency

    1000Hz (Instantaneous maximum frequency 1500Hz)

    Maximum drive power

    100%

    Type of glue used

    Adhesives, lubricants, water solvents, molten polymers, etc.

    Applicable viscosity range

    0-20000cps

    Fluid temperature range

    2080℃


    Product Features and Advantages

     

    High speed

    Maximum operating frequency up to 1000Hz, instantaneous maximum frequency up to 1500Hz, non-contact spraying avoids Z-axis movement.

     

    High efficiency

    Can be matched with any dispensing platform in the market, can spray on uneven workpiece surface (flexible circuit boards, etc.).

     

    High precision

    The drive adopts piezoelectric method, the spraying accuracy can reach 99%, can realize the minimum line width 0.17mm, the minimum spot diameter 0.15mm, the minimum single spot volume up to 0.3nl non-contact dispensing.

     

    High Convenience

    Unique structural design, not only can realize the rapid disassembly of the glue feeding components, but also less sealing consumables, maintenance is more simple and fast.

     

    Application Field

    Acoustics, optics, semiconductors, automotive electronics, photovoltaics, new energy batteries, flexible circuit boards, displays

     

     

Related Product

Send Inquiry

NOTE: Please leave your email, our professional person will contact you asap!