Mirae chip mounter manufacturers take you to understand the introductory knowledge of the placement machine


Release time:

2022-07-08

The Mirae chip mounter manufacturer tells you that the placement machine is a high-tech product, and it is very important for the machine and the person to operate it safely and correctly. Mirae chip mounter manufacturers tell you that the most basic thing to operate the placement machine safely is that the operator should have the most accurate judgment, and should follow the following basic safety rules:

The Mirae chip mounter manufacturer tells you that the placement machine is a high-tech product, and it is very important for the machine and the person to operate it safely and correctly. Mirae chip mounter manufacturers tell you that the most basic thing to operate the placement machine safely is that the operator should have the most accurate judgment, and should follow the following basic safety rules:

Mirae chip mounter from China1. The Mirae chip mounter manufacturer tells you that the machine operator should be trained in the correct method. The power should be turned off when checking the machine, replacing parts, or repairing and internal adjustments (the maintenance of the machine must be carried out when the emergency button is pressed or the power is turned off.
2. The Mirae chip mounter manufacturer tells you that the YPU (programming unit) is in your hand to stop the action at any time when "reading the coordinates" and adjusting the machine.
3. Mirae chip mounter manufacturers tell you that make sure that the "interlocking" safety equipment remains effective to stop the machine at any time, and the safety detection on the machine cannot be skipped or short-circuited, otherwise personal or machine safety accidents are very likely to occur.
4. Mirae chip mounter manufacturers tell you that only one operator is allowed to operate one machine during production. During operation, be sure to keep body parts such as hands and head out of the machine's range of motion. The machine must be properly grounded (true ground, not neutral). Do not use the machine in flammable gas or extremely dirty environments.
The above information is the Mirae chip mounter manufacturer's introduction and analysis of the introductory knowledge of the placement machine, hope it helps you.