Classification of PCB shuttle conveyor


Release time:

2021-11-25

The single-track PCB shuttle conveyor transports one PCB at a time. When a PCB board is mounted, the next PCB board is already in the buffer area, and the width of the PCB board can be automatically adjusted according to the programmed PCB board parameters.

1. Monorail PCB shuttle conveyor

The single-track PCB shuttle conveyor transports one PCB at a time. When a PCB board is mounted, the next PCB board is already in the buffer area, and the width of the PCB board can be automatically adjusted according to the programmed PCB board parameters. The PCB board transmission has both a left-to-right format and a right-to-left format for the PCB board. , The mechanical stop PCB board mechanism is a standard form and adapts to the shape of a single PCB board.

PCB shuttle conveyor

2. Double-track PCB shuttle conveyor

The double-track PCB shuttle conveyor transports two PCB boards at a time. There are 6 areas in the dual-track option, areas A, C, D and F are used for input/output PCB, and areas B and E are used for patching. The placement machine can put up to 3 PCBs at a time, generally two PCB boards are in areas B and E, and the other PCB board can be in any other input/output position.

The dual-track PCB shuttle conveyor software follows the principle of first-in, first-out. The first PCB board that enters the machine is also the first to pass out of the machine, and the same product is run in dual tracks. When a PCB board is patched, the other PCB board is in the buffer area of ​​the preparation track. After the previous PCB board is patched, the PCB board in the pre-track area will be processed immediately, so that the time to transfer the PCB board can be reduced to the lowest.