With the rapid development of the electronics industry and the continuous improvement of product quality, excellent soldering technology plays an increasingly important role in the electronics industry. Best Robotic Soldering Machine is a kind of automatic technology soldering machine equipment. Automatic soldering is a science. The basic principle is to heat and melt the solid solder wire according to the automatic heating electric soldering iron. It is injected into the middle of the metal material to be welded, and after cooling, a solid and reliable welding point is produced. So what are the requirements for the soldering process of the Best Robotic Soldering Machine? 

What are the requirements for the soldering process of the Best Robotic Soldering Machine:

1. Wetting
Wetting is the protagonist of our Best Robotic Soldering Machine welding behavior. Other bonding principles are: using liquid solder to wet the substrate to achieve the bonding effect. When the solder is wetted on the substrate, the two are chemically bonded to form a continuous bond. In actual conditions, the substrate is often eroded by the air and the surrounding environment, and there will be an oxide layer. Block the solder of the soldering machine and cannot achieve a good wetting effect.
2. Welding and gluing
When two materials are glued together, the mutual adhesion of their surfaces is caused by the glue giving them a mechanical bond. The soldering of the Best Robotic Soldering Machine is actually to form an intermolecular bond between the solder and the metal. The molecules of the solder penetrate into the molecular structure of the base metal to form a solid and completely metal structure. When the solder dissolves, it is also impossible to completely wipe it off the metal surface because it has become part of the base metal.
3. Cleaning
When the solder surface and the metal surface are clean, the solder will wet the metal surface as well. If the cleaning is not enough, a thin contamination layer will form between the solder and the metal. Almost all metals will be oxidized immediately when exposed to the air. This very thin oxide layer will prevent the wetting of the solder on the metal surface. effect. In the same way, in the manufacturing process of our company's cordless phones, many PCB solder pads are exposed to the air for a long time without taking any cleaning measures, and the oxide layer formed will seriously affect the subsequent soldering quality.

The above content is an introduction to the requirements for the soldering process of the Best Robotic Soldering Machine. Now the technical requirements for soldering personnel using automatic soldering machines have been greatly reduced. The complex soldering machine process only requires an ordinary soldering worker to operate the equipment. can be completed. Although automation equipment has greatly reduced the technical requirements, these common soldering techniques still need to be mastered.