The use characteristics of SMT cooling conveyor
The SMT cooling conveyor includes a barrel, a rotating shaft with a spiral plate, a bearing, and a driving device. There is a cooling water jacket on the outside of the cylinder of the SMT cooling conveyor. The two ends of the rotating shaft are empty pipes. The cavity of the spiral plate is connected with the empty pipes at both ends of the rotating shaft. The empty pipe flows out to form an inner cooling water channel.
The main features of SMT cooling conveyor
(1) Material cooling range of the SMT cooling conveyor. the temperature difference between the maximum temperature and the minimum temperature, so as to design the cooling series of the SMT cooling conveyor, and the length of the single-stage cooling generally does not exceed 7 meters.
SMT cooling conveyor manufacturers take you to understand the cooling screw conveyor
The SMT cooling conveyor manufacturer tells you that the cooling screw conveyor includes a barrel, a rotating shaft with a screw plate, a bearing, and a driving device. There is an outer cooling water jacket outside the cylinder, and both ends of the rotating shaft are empty pipes. The SMT cooling conveyor manufacturer tells you that the cavity of the spiral plate is connected to the empty tubes at both ends of the rotating shaft, and the cooling water flows from the empty tube at the inlet end through the cavity of the spiral plate and then flows out from the empty tube at the outlet end to form an inner cooling water channel. The material is cooled evenly during the conveying process, and the cooling effect is good.
Introduction of SMT cooling conveyor and its characteristics
SMT cooling conveyor, also known as cooling screw conveyor, cooling screw conveyor, its main function is to cool the high temperature material during the conveying process to achieve the normal temperature required.
SMT cooling conveyor manufacturers take you to understand the working principle of cooling conveyors
This article will share the cooling principle of the water-cooled screw conveyor: 1. The SMT cooling conveyor manufacturer tells you that the tubular screw conveyor: choose the tube shaft and shell of the large diameter tube, and the double-layer tube can be sleeved together, so that The amount of water inside can be increased, and the temperature of the material can be quickly lowered.
How to use the AOI buffer optical detector correctly
AOI buffer optical inspection equipment belongs to small and medium-sized precision machinery. Mastering the operation methods and skills can not only play the role of AOI buffer equipment, but also play a key role in the life of the equipment.
The role of AOI buffer in SMT line equipment
Defect warning: that is, to prevent defects in the previous process. We can use AOI buffer products in solder paste printing, in front of the furnace, and behind the furnace to cut out the bad machine in time, through the effective control of on-site personnel.
What is the difference between SPI and AOI buffer in SMT
AOI buffer is caused by various mounting and welding defects in the SMT production process, such as missing parts, tombstones, offsets, polar reverses, empty welding, short circuits, wrong parts, etc.
What advantages will the combined use of SPI and AOI bring
With the development of modern high-tech, the detection technology of SMT products is also constantly updated. Various detection equipments have emerged one after another in the human eye with magnifying glass or microscope.
The choice of using SMT Nozzle Cleaner to remove residues after SMT patch processing
SMT Nozzle Cleaner is mainly used for post-soldering cleaning of assembled boards during SMT chip processing to remove flux residues after wave soldering, reflow soldering and manual soldering, as well as contaminants caused by the assembly process.
SHENZHEN HANSOME TECHNOLOGY CO.,LTD.
Floor 5, Duchuangyungu Technology Innovation Park, Shiyan 3rd Industrial Area, Shiyan, Baoan,Shenzhen City,China
Quick Contact HSTECH
Our team will feedback you in 2 hours