Mirae chip mounter manufacturers take you to understand the functions of the parts of the chip mounter


Release time:

2022-07-13

The Mirae chip mounter manufacturer tells you the names and functions of the parts of the chip mounter: 1. Host. Main Power Switch: Turn the host power on or off. Vision Monitor: Displays the recognition of images or components and marks obtained by moving the lens.Operation Monitor: Display the VIOS software screen of the machine operation. If there is an error or problem during the operation, the correction information will also be displayed on this screen.

The Mirae chip mounter manufacturer tells you the names and functions of the parts of the chip mounter: 1. Host. Main Power Switch: Turn the host power on or off. Vision Monitor: Displays the recognition of images or components and marks obtained by moving the lens.Operation Monitor: Display the VIOS software screen of the machine operation. If there is an error or problem during the operation, the correction information will also be displayed on this screen.

Mirae chip mounter prices china
The Mirae chip mounter manufacturer tells you that the chip mounter also has a Warning Lamp: Which indicates the operating conditions of the chip mounter when it is green, yellow, and red. Green: The machine is in automatic operation; Yellow: Error (return-to-origin cannot be performed, pick-up error, recognition failure, etc.) or interlock generation; Red: The machine is in an emergency stop state (the machine or YPU stop button is pressed). Emergency Stop Button: Press this button to immediately trigger an emergency stop.
2. Head Assembly. The Mirae chip mounter manufacturer tells you that the head assembly is moved in the XY direction (or X direction) to pick up parts from the feeder and place them on the PCB. Head Assembly Movement Handle: When the servo control is released, you can move in each direction by hand, and this handle is usually used when moving the head assembly by hand.
3. Vision System. The Mirae chip mounter manufacturer tells you that Moving Camera: Used to identify marks on the PCB or to track positions or coordinates. Single-Vision Camera: Used to identify components, mainly those QPFs with pins.
The Mirae chip mounter manufacturer tells you that the Backlight Unit: Illuminates the element from the back when identified with a separate vision lens. Laser Unit: The laser beam can be used to identify parts, mainly sheet parts. Multi-Vision Camera: It can identify multiple parts at one time, speeding up the identification speed.
4. FeederPlate: The Mirae chip mounter manufacturer tells you that FeederPlate is a tape feeder, bulk feeder, and tube feeder (multi-tube feeder), which can be installed on the chip mounter. Front or rear feeding platform.
The above information is the Mirae chip mounter manufacturer's introduction and analysis of the functions of the parts of the chip mounter, hope it helps you.