News
Check category
/
/
/
Introduction of SMT cooling conveyor and its characteristics

Introduction of SMT cooling conveyor and its characteristics

(Summary description)SMT cooling conveyor, also known as cooling screw conveyor, cooling screw conveyor, its main function is to cool the high temperature material during the conveying process to achieve the normal temperature required.

Introduction of SMT cooling conveyor and its characteristics

(Summary description)SMT cooling conveyor, also known as cooling screw conveyor, cooling screw conveyor, its main function is to cool the high temperature material during the conveying process to achieve the normal temperature required.

Information

SMT cooling conveyor, also known as cooling screw conveyor, cooling screw conveyor, its main function is to cool the high temperature material during the conveying process to achieve the normal temperature required.

SMT cooling conveyor Manufacturers china
SMT cooling conveyor is a high temperature resistant screw conveyor, which transports high temperature powder, small particles, and other bulk materials in a closed tube body. The high temperature of the feeding material can reach 720 degrees. The temperature can be as low as 50 degrees, and it is a piece of conveying equipment that integrates cooling and conveying.
Features of the SMT cooling conveyor. 1. Use heat dissipation cooling fans. 2, Programmable Logic Controller. 3. Hand crank width adjustment 4, Economic space. 5. Use stainless steel screw, smooth and parallel width adjustment. 6. Left to right travel, or right to left, front rail fixed. 7. ESD working table. 8, Height adjustable and stable feet cup location. 9, Speed ​​control. 10. SMEMA compatible.
Through the above introduction and analysis of the SMT cooling conveyor and its characteristics, hope it helps you.

Keyword:

RELATED NEWS

08-15
2022
SMT cooling conveyor manufacturers take you to understand the working principle of cooling conveyors

This article will share the cooling principle of the water-cooled screw conveyor: 1. The SMT cooling conveyor manufacturer tells you that the tubular screw conveyor: choose the tube shaft and shell of the large diameter tube, and the double-layer tube can be sleeved together, so that The amount of water inside can be increased, and the temperature of the material can be quickly lowered.

08-08
2022
Mirae pick and place machine manufacturers take you to understand the transfer organization of place machines

PCB transfer and carrier organization. The manufacturer of the Mirae pick and place machine tells you that the conveying mechanism is an ultra-thin belt conveying system placed on the guide rail. Usually, the belt is installed at the edge of the track. Its function is to send the PCB to the predetermined position, and then send it to the bottom after placement.

08-01
2022
Mirae pick and place machine manufacturers take you to understand the composition of the placement machines

The Mirae pick and place machine manufacturer tells you that there are many varieties of current placement machines, but whether it is a fully automatic high-speed placement machine or a manual low-speed placement machine, its overall layout is similar.

07-25
2022
Mirae pick and place machine manufacturers take you to understand the daily maintenance of manual placement machines

1. Check weekly. The manufacturer of the Mirae pick and place machine tells you that inspect the nozzle clamp to check the buffer action, if the action is not smooth, apply a thin layer of lubricant, and if the clamp is loose, tighten it. Move the lens to clean dust and residue from the lens.

07-18
2022
Mirae pick and place machine manufacturers take you to understand the Turret Type placement machine

The Mirae pick and place machine manufacturer tells you that the component feeder of the turret-type placement machine is placed on a single-coordinate moving feeder, and the substrate (PCB) is placed on a X/Y coordinate system moving worktable. The film header is mounted on a turret.

07-14
2022
Mirae pick and place machine manufacturers take you to understand the arch type placement machine

The Mirae pick and place machine manufacturer tells you that the component feeder and substrate (PCB) of the arch-type placement machine are fixed, and the placement head (with multiple vacuum suction nozzles) moves back and forth between the feeder and the The components are taken out from the feeder, and the position and orientation of the components are adjusted, and then placed on the substrate. Because the placement head is installed on the X/Y coordinate moving beam of the arch type, it is named.

CONTACT US

SHENZHEN HANSOME TECHNOLOGY CO.,LTD.

3rd Floor,Building A,Sha Tang Bei Fang Yong Fa Industrial Area,Sha Jing, Bao an, Shenzhen, China 

Mob/WhatsApp: 86-18825230535 (24hrs)

Quick Contact HSTECH

Our team will feedback you in 2 hours

留言应用名称:
客户留言
描述:
验证码

COPYRIGHT SHENZHEN HANSOME TECHNOLOGY CO.,LTD.    

×
  • 1
  • rwm