Daily maintenance of 90 degree pcb unloader


Release time:

2021-09-14

The above 5-step operation method can not only reduce accidents caused by misoperation, but also is a common maintenance method for 90 degree pcb unloaders and prolong the life of the machine.

1. Check whether the oil pressure of the 90 degree pcb unloader is normal, whether the pressure gauge is normal, and visually check whether the pressure indicated by the pressure gauge is normal.

90 degree pcb unloaders

2. Whether the switches and display screens on the operation panel are abnormal, the buttons on the 90 degree pcb unloader operation panel should be kept clean, free of grease, and the contacts should be in a conducting state.

3. Whether there is foreign matter between the gears, there is no accumulation of dust and oil stains, apply gear grease to the gear part of the roller and replace the gear oil.

4.90 degree pcb unloader mechanical components, circuits and operating procedures shall not be modified arbitrarily without professional technicians.

5. Whether the contact points of the relay in the control panel are good, and whether the piping of the hydraulic equipment is good.

The above 5-step operation method can not only reduce accidents caused by misoperation, but also is a common maintenance method for 90 degree pcb unloaders and prolong the life of the machine.